DNE: S4 Hood Stand
Folding, multifunctional, aluminum table Dneprodenttools company for repair of removable parts of the car – the bonnet, doors, boot lid, etc .. The table consists of a base-side sliding drawers and four adjustable S-shaped supports.
Main section bearing parts are made from a solid aluminum profile pipe 30×30 mm. Pull-regulated S-shaped supports are made of polished stainless steel d = 20 mm., Also of stainless steel profile pipes are made by sliding the guide section “X” axis. The table is supported by four roller hardware d = 75 mm. Latching. In the center of the table has a removable retainer to lock the boot lid. on S-shaped sliding bearings, are quick-action locks the settings pre-working height of the table without having to screw fixation. Also on sliding supports there is a semicircle for additional fixation component to be repaired and the support rubber tip. All moving parts of the table fixed with a screw ring, which ensures maximum comfort while fixing ties parts to the table.
Dimensions of the table:
By “X” axis
– in assembled state – 850 mm .;
– in the unfolded state – 1370 mm .;
– in the unfolded state with the S-shaped supports – 1900 mm.
By “axis Y »
– when assembled – 1,020 mm .;
– in the unfolded state – 1450 mm.
Net weight – 12.8 kg.
$450.005 in stock
5 in stock
Carbon Tech: Never Loose Adaptor
Never Loose Adaptor mounts to either the DNE or Ultra light Collar and lets you mount the never loose magnetic light mount 90 degrees to the boom to allow the light to slide up and down the boom. This is great for side panel guys. I do not recommend these for hail tech because it takes the ease and articulation out of the Never Loose and slows you down!!(0 reviews)$25.00 Read more
DNE: Carbon Rod (2000) 78″
The carbon rod is made from a material which has high strength, rigidity and low weight. Rod is designed for the repair of hail damage on technology “repair dents without painting.” It consists of three parts, which are interconnected threaded connection that eliminates backlash and provides strength of the product as a whole. So is it allows you to change the length of the rod, increase or reduce the overall length. Tie rod has four holes for threaded nozzles c 5.16 inches (USA).
Material – Carbon;
The total length of the boom – 2010 mm .;
– nozzle length – 1000 mm .;
– handle length – 500 mm .;
– central extension – 510 mm.
Rod diameter – 29 mm.
Bar weight – 0.96 kg.
Number of Holes for nozzles – 4.(0 reviews)$575.00 Add to cart