DNE: 52″ 6-Strip LED Light (Head Only)
52″ 6-Strip LED Light
HEAD Only
No stand included
$649.00
20 in stock20 in stock
Related products
-
Elim A Dent
Elim A Dent: 20″ 6 Strip Adjustable Fade Auto Cup (Makita) Ver-3
20″ 6 Strip Adjustable Fade Auto Cup (Makita) Ver-3 BATTERIES AND CHARGER SOLD SEPARATE PWM Dimmer Included Battery Powered Suction Cup Elim A Dents Spinal-Cord Lens height track system for maximum fade adjustability Locking door for quickly swapping lenses on the fly LED Battery level indicator Rubber over mold protective corners USE *WARNING NOT COMPATIBLE WITH G SERIES BATTERIES* USE BL1815 – BL1860 BATTERIES OR GENERIC REPLACEMENTS “Patents 9109769, 9212793” This board is powered by Makita 18v lithium ion batteries or off-brand replacements. The board can be rotated and twisted 360 degrees. Comes with 6 L.E.D. strips, 3 warm white 3 cool white. 6 independent switches for each individual LED strip. Batteries charge in 15-40 min and last for 3 to 8 +hours depending on how many strips you power and what size battery your using. New Spinal-Cord Setup Elim A Dents Patented Spinal Cord setup has a bolt and nut inside a plastic housing that allows you to set the tension of each link. Ounce Spinal Cord fittings are connected they cannot pop apart without loosening the tension screws. If you prefer that loose broke in feel loosen the screws if you like to keep that tight like new feeling tighten the screws. If you would like to have part of the links loose so you can maneuver and spin the board freely but have another section tight to support the board’s weight well you can do that also. >18v powered by Makita lithium ion batteries or off-brand replacements. >Allows you to use existing Makita chargers and batteries to eliminate carrying multiple different batteries and chargers. > Easy battery release for swapping out dead batteries > Completely cordless no exposed wires. > Versatile 360 degrees of movement with no worries of cord tangles. > Quick disconnects to easily replace wearable parts like spinal cord assembly. > 6 18v strips with warm/cool color combination. > 6 independent switches on LED tray housing so to allow for various led strip combinations. >Matched acrylic faceplate for the perfect fade. Acrylic is secured into place so it won’t slide or fall out. >Built in battery powered suction cup that constantly monitors vacuum to ensure your board remains secured to a working surface. >Low profile dimmer built into the base to control the brightness of L.E.D. >LED Battery level indicator. >Rubber over mold protective corners.
(0 reviews)$600.00 Read more -
DNE
DNE: S4 Hood Stand
Folding, multifunctional, aluminum table Dneprodenttools company for repair of removable parts of the car – the bonnet, doors, boot lid, etc .. The table consists of a base-side sliding drawers and four adjustable S-shaped supports.
Main section bearing parts are made from a solid aluminum profile pipe 30×30 mm. Pull-regulated S-shaped supports are made of polished stainless steel d = 20 mm., Also of stainless steel profile pipes are made by sliding the guide section “X” axis. The table is supported by four roller hardware d = 75 mm. Latching. In the center of the table has a removable retainer to lock the boot lid. on S-shaped sliding bearings, are quick-action locks the settings pre-working height of the table without having to screw fixation. Also on sliding supports there is a semicircle for additional fixation component to be repaired and the support rubber tip. All moving parts of the table fixed with a screw ring, which ensures maximum comfort while fixing ties parts to the table.
Dimensions of the table:
By “X” axis
– in assembled state – 850 mm .;
– in the unfolded state – 1370 mm .;
– in the unfolded state with the S-shaped supports – 1900 mm.
By “axis Y »
– when assembled – 1,020 mm .;
– in the unfolded state – 1450 mm.
Net weight – 12.8 kg.
(0 reviews)$450.00 Add to cart -