Accessories
Showing 1–12 of 60 results
-
Willey QuickWilley Quick Tools: Green Grip Shells
With grip shells you can work with your battery powered tools right next to you without the worry of your tool sliding off the panel, scratching the car or your tool falling to the ground. Grip shells with fit most Milwaukee, makita and dewalt batteries up to 6ah- fits a wide range of batteries
– soft rubber to prevent sliding to scratching
– 3 slots to hold glue tabs
– use as a cup to hold nuts, bolts, or glue tabs
– bright lime green(0 reviews)$11.99 Add to cart -
Willey QuickWilley Quick Tools: Blue Grip Shells
With grip shells you can work with your battery powered tools right next to you without the worry of your tool sliding off the panel, scratching the car or your tool falling to the ground. Grip shells with fit most Milwaukee, makita and dewalt batteries up to 6ah – fits a wide range of batteries
– soft rubber to prevent sliding to scratching
– 3 slots to hold glue tabs
– use as a cup to hold nuts, bolts, or glue tabs
– bright lime green(0 reviews)$11.99 Add to cart -
Willey QuickWilley Quick Tools: Tool Cart With Tray Accessories
– made with magnetic stainless steel to work with all our magnetic products
– sturdy aluminum legs anodized black
– quick setup and tear down
– light weight (only 19lbs)
– compact (18in x 18in)
– 39in total height
– premium dual locking wheels
– comes with carrying bagThis cart was made to help keep technicians compact and efficient. Designated spots for your hail rod, glue gun, slide hammer, mini lifter, hammers, hand tools, whale tails, long and short rods, door tools, r&I tools. Perfect height for working roofs and roof rails or doing door dents
* assembly*
– Lock wheels to thread/un thread
– thread legs together
– thread legs onto bottom base
– place top tray over legs
– thread knobs onto bolts through top tray
– DONE– NO tools needed for assemble/disassemble
(0 reviews)$848.00 Add to cart -
Willey QuickWilley Quick Tools: Door Jammer (Black Short)
Fast, light, and easy to use. Sets up in seconds and holds your door panel completely solid.
-The “C” end goes on the striker
-twist to tighten “c” end
-The loop end goes in the latch
-push button slide to tighten and fine tune twist(0 reviews)$129.00 Read more -
Willey QuickWilley Quick Tools: Door Jammer (Green Short)
Fast, light, and easy to use. Sets up in seconds and holds your door panel completely solid.
-The “C” end goes on the striker
-twist to tighten “c” end
-The loop end goes in the latch
-push button slide to tighten and fine tune twist(0 reviews)$129.00 Add to cart -
Willey QuickWilley Quick Tools: Door Jammer (Blue Short)
Fast, light, and easy to use. Sets up in seconds and holds your door panel completely solid.
-The “C” end goes on the striker
-twist to tighten “c” end
-The loop end goes in the latch
-push button slide to tighten and fine tune twist(0 reviews)$129.00 Add to cart -
Willey QuickWilley Quick Tools: Quick Prop Rod (Blue Long)
This prop rod is designed to be universal between hoods, doors, and trunks for most vehicles. We aimed to make the HDT, quick and easy to use while still trying to keep it as solid as possible with little to no movement in the panel.
Extends from 15in to 23in
-The “C” end goes on the striker
-twist to tighten “c” end
-The loop end goes in the latch
-push button slide to tighten and fine tune twistPLEASE NOTE – when using this on the hood or trunk, be sure to keep the “C” end tightened on the striker before releasing the latch.
(0 reviews)$229.00 Add to cart -
Willey QuickWilley Quick Tools: Quick Prop Rod (Black Long)
This prop rod is designed to be universal between hoods, doors, and trunks for most vehicles. We aimed to make the HDT, quick and easy to use while still trying to keep it as solid as possible with little to no movement in the panel.
Extends from 15in to 23in
-The “C” end goes on the striker
-twist to tighten “c” end
-The loop end goes in the latch
-push button slide to tighten and fine tune twistPLEASE NOTE – when using this on the hood or trunk, be sure to keep the “C” end tightened on the striker before releasing the latch.
(0 reviews)$229.00 Add to cart -
Hanging-Chains-BarsRevolution PDR: The Declaration
In an industry where leverage and stability are everything, The Declaration is the leverage set
you’ve been looking for.Complete with both a large and small plate, 2 revolver clamps, and 2 knob clamps, your possibilities are
endless. From leveraging under a hood to filling in a large door gap, this tool will give you solid,
stable leverage, every time. Check our album of pictures showcasing the many uses we’ve found so far!(0 reviews)$276.99 Add to cart -
AccessoriesBumper Bag Plus (4″x 6″)
Bumper Bag Plus is a versatile tool that works in many different areas of automotive body restoration field. Use it to take small dents out of plastic bumpers and sheet metal, adjust the fit of adjoining sheet metal panels, and even use it to cushion a jack saddle to eliminate the risk of damage to the subframe.
Bumper Bag Plus is made from 70,000 pound tensile strength webbing and is practically indestructible. However, it is also soft enough to conform to the shape of whatever it is pressing up against. This allows it to take the energy of the force and prevent further damage to the area.
Features:
- Soft and pliable – conforms to the shape of the panel
- Made from 70,000 pound tensile strength webbing – extremely tough and practically indestructible
- Conforms to the shape of whatever it is pressing up against to eliminate damage to body panels
Benefits:
- Use as a soft dolly
- Minimize use of filler by removing small dents in plastic bumpers and sheet metal parts
- Helps to adjust panel fit – for example, place near the hood hinge to gently persuade the sheet metal into alignment
- Helps to adjust twist in doors for a better fit with quarter panel
- Cushions jack saddle to prevent damage to sheet metal of subframe
- Versatile
Specifications:
- Length: 4″ (19 cm)
- Width: 6″ (17 cm)
(0 reviews)$47.00 Add to cart -
AccessoriesBumper Bag Plus (6″x 6″)
Bumper Bag Plus is a versatile tool that works in many different areas of automotive body restoration field. Use it to take small dents out of plastic bumpers and sheet metal, adjust the fit of adjoining sheet metal panels, and even use it to cushion a jack saddle to eliminate the risk of damage to the subframe.
Bumper Bag Plus is made from 70,000 pound tensile strength webbing and is practically indestructible. However, it is also soft enough to conform to the shape of whatever it is pressing up against. This allows it to take the energy of the force and prevent further damage to the area.
Features:
- Soft and pliable – conforms to the shape of the panel
- Made from 70,000 pound tensile strength webbing – extremely tough and practically indestructible
- Conforms to the shape of whatever it is pressing up against to eliminate damage to body panels
Benefits:
- Use as a soft dolly
- Minimize use of filler by removing small dents in plastic bumpers and sheet metal parts
- Helps to adjust panel fit – for example, place near the hood hinge to gently persuade the sheet metal into alignment
- Helps to adjust twist in doors for a better fit with quarter panel
- Cushions jack saddle to prevent damage to sheet metal of subframe
- Versatile
Specifications:
- Length: 6″ (19 cm)
- Width: 6″ (17 cm)
- Height: 6″ (5 cm)
(0 reviews)$49.00 Add to cart -
AccessoriesBumper Bag Plus (7″x 8″)
Bumper Bag Plus is a versatile tool that works in many different areas of the body shop. Use it to take small dents out of plastic bumpers and sheet metal, adjust the fit of adjoining sheet metal panels, and even use it to cushion a jack saddle to eliminate the risk of damage to the subframe.
Bumper Bag Plus is made from 70,000 pound tensile strength webbing and is practically indestructible. However, it is also soft enough to conform to the shape of whatever it is pressing up against. This allows it to take the energy of the force and prevent further damage to the area.
Features:
- Soft and pliable – conforms to the shape of the panel
- Made from 70,000 pound tensile strength webbing – extremely tough and practically indestructible
- Conforms to the shape of whatever it is pressing up against to eliminate damage to body panels
Benefits:
- Use as a soft dolly
- Minimize use of filler by removing small dents in plastic bumpers and sheet metal parts
- Helps to adjust panel fit – for example, place near the hood hinge to gently persuade the sheet metal into alignment
- Helps to adjust twist in doors for a better fit with quarter panel
- Cushions jack saddle to prevent damage to sheet metal of subframe
- Versatile
Specifications:
- Length: 8″ (19 cm)
- Width: 7.0″ (17 cm)
(0 reviews)$59.00 Add to cart
