Shop Departments

(719) 302-7179

KECO
Tabs and Lifters
Shop Now
Edgy Tools
Tips, Tips and more Tips
Shop Now
DNE
Lights and Hail Rods
Shop Now
Previous
Next

Instant Approval | $500-$15,000 | No Hard Credit Pull

Apply Today
How to Use

Fast Shipping

Multiple Locations

Payment Options

Customer Support

  • Dentcraft

    DENTCRAFT: Steel 2lb Slide Hammer

    2lb (.9 Kilo) steel slide hammer has a zinc coated steel shaft.

    4 inch weight is 2 lbs, The large comfort grip is five inches long.

    Weight has a travel of 7-1/2” inches.

    Weight is also zinc coated to protect against rust and contamination.

    Top Grip with a easy grip design fits nicely in the palm of your hand.

    Tab adapter is designed to fit almost every pdr glue tab available.

    (0 reviews)
    $149.95 Add to cart
  • Dentcraft

    DENTCRAFT: Aluminum Slide Hammer

    12 oz slide -Light weight all aluminum anodized finish -Fits most tabs -19″ overall length

    (0 reviews)
    $149.95 Add to cart
    PDR Accessories

    Flat Bar Attachment (Moose Knuckle)

    Flat bar attachment for the Moose Knuckle.

    Moose Knuckle is not included.

    (0 reviews)
    $60.00 Add to cart
  • Guns

    Trifecta Cordless Glue Gun Glue

    The Trifecta Trigger glue gun comes was designed with a dual temperature switch.

    The glue gun accepts a Ryobi 18 Volt ONE battery by default, you can purchase adapters for Dewalt, Makita, Milwaukee. or Bosch separately.

    The red light setting is a standard temperature of 383 F.

    This setting is very similar to traditional high temp glue guns and will give the glue you use a similar feel and function to standard electric powered glue guns.

    However, by moving the on/off switch the opposite direction to the blue light setting, the glue gun will run at a reduced temperature.  We call this “Eco Mode” and it is designed to be hot enough to allow the various adhesives to perform well, but greatly extend the battery run time of the tool.  For instance, in the Eco setting the run time of a fully charged lithium-ion battery can be up to three times the run time of the tool in the red or high temp setting.

    The feedback we have always received on battery power glue guns is how to increase battery life.  This new Eco Mode is designed to do just that.

    Other unique features include time tested durable feed design, extension nozzle for a clear view of glue placement, heat up time in either setting of 3 minutes.

    (0 reviews)
    $140.00 Add to cart
  • Keco

    KECO: Dead Center 55 x 7 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $18.00 Add to cart
  • Keco

    KECO: Dead Center 45 x 7 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $18.00 Add to cart
  • Keco

    KECO: Dead Center 39 x 7 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $18.00 Add to cart
  • Keco

    KECO: Dead Center 33 x 7 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $18.00 Add to cart
  • Keco

    KECO: Dead Center 27 x 5 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $16.50 Add to cart
  • Keco

    KECO: Dead Center 21 x 5 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $16.50 Add to cart
  • Glue Sticks

    MEGA Power Green PDR Glue

    Directly Imported from Brazil. This MEGA POWER Green PDR Glue is at The top of the PDR Glue chain.  Made with revolutionary silicon polymers.  Recommended conditions are 42-102 degrees.  The pulling power is amazing!  The Mega Green has a little longer set time than the Brazilian Gold and is virtually release agent free.  The Green will increase your glue pulling efficiency.  It is great for hail, PDR smash work and GPDR.  It comes in a 1lb re-sealable bag.  That’s 16, 12 inch sticks.

    (0 reviews)
    $35.00 Add to cart
  • Guns

    Trifecta Ryobi to Dewalt Adapter

    Trifecta Ryobi to Dewalt Adapter

    (0 reviews)
    $40.00 Add to cart
  • PDR Accessories

    ANSON: BURRO CURVED WINDOW WEDGE

    (0 reviews)
    $10.00 Read more
  • PDR Glue Accessories

    ANSON: PDR SLIDE HAMMER

    This is our standard dent repair slide hammer and one of our best sellers. The slide is a standard powder coated black and altogether this dent repair slide hammer weighs 3 lbs.

    (0 reviews)
    $105.00 Read more
  • PDR Glue Accessories

    ANSON: MINI PDR SLIDE HAMMER

    Mini dent removal slide hammer has a great overall weight to size ratio and also features two rubber bumpers at each end of the slide. This dent removal slide hammer is made by PDR Outlet.

    (0 reviews)
    $100.00 Read more
  • Anson

    ANSON PDR: PLAIN JANE CLEAR TIP VARIETY PACK

    PLAIN JANE CLEAR TIP VARIETY – 4PC

    (0 reviews)
    $36.00 Add to cart
  • Anson

    ANSON PDR: ROOT BEER ULTEM VARIETY PACK SCREW TIPS

    Root beer Ultem variety pack of screw on tips. This set of PDR knock down and tapper tips comes with one fine tip, one medium tip and one round tip. These dent removal PDR tips are made from one of the highest quality Ultem and manufactured here in the United States by Plain Jane PDR. Ultem when used for a knock down, tapper or blending hammer offers the user a superior tool tip that resists mushrooming and scratching or marring of a vehicles factory finish. The variety pack of PDR root beer ultem knock down tips gives you a wide range of tool tips to choose from so whether you are knocking down a crown or just a small area this PDR tool tip set will have what you need to get the job done.

    (0 reviews)
    $24.00 Add to cart
  • Anson

    ANSON PDR: Single Stirrup Leverage Door Strap

    This Stirrup door strap was designed with the PDR tech in mind. The door strap features an extra large ring that is made to accommodate some of the largest of hail rods.

    (0 reviews)
    $35.00 Read more
  • Anson

    ANSON: Burro PINK SERIES TABS Variety Pack

    Burro PINK SERIES Variety Pack

    (0 reviews)
    $15.00 Add to cart
  • Anson

    Anson PDR: Glue Gun – 110 volt – Tec 305

    Light weight professional high-temperature 110-volt glue gun, 150 watts with self-regulating heaters. The Anson glue gun has a removable base, on and off switch, adjustable squeeze setting and removable nozzle. This glue gun is known worldwide for its reliability and ease of use.

    (0 reviews)
    $30.00 Read more
  • Anson

    ANSON PDR: Root Beer PDR Glue

    This Super Premium PDR Dent Removal Adhesive is destined to be the choice of professional Dent Repair techs in “Hot Weather” and “Big Dent” removal. Anson PDR, is proud to be the industry leader in PDR Glue Adhesives. For technicians that purge glues, Root Beer glue purges well with Xtreme Purple in warm weather and Anson White in cooler temperatures. Enjoy the NEW Root Beer Super Premium formula!

    (0 reviews)
    $20.00 Add to cart
  • Anson

    ANSON PDR: Hawg PDR Glue – Just Orange

    Orange glue for all around temperatures. Designer glue developed for thicker metal tanks and roof rails.

    (0 reviews)
    $22.00 Add to cart
  • Anson

    ANSON PDR: Hawg PDR Glue

    Orange glue for all around temperatures. Black glue for warmer temps. Designer glue developed for thicker metal tanks and roof rails.

    (0 reviews)
    $20.00 Add to cart
  • Anson

    ANSON PDR: DentOut Yellow Glue – Cold Weather

    DentOut Yellow PDR Glue – Cold Weather

    (0 reviews)
    $15.00 Read more
  • Black Plague

    BLACK PLAGUE: OVAL GANG GREEN VARIETY PACK (12 PIECES)

    These tabs are bananas good! They range in size from 18mm, 22mm, 26mm, 32mm, 49mm, & a giant 70mm Oval Tab! You get TWO of each size in this handy kit.

    (0 reviews)
    $39.00 Read more
  • Black Plague

    BLACK PLAGUE: Black Ice Glue Tabs, 20mm

    (0 reviews)
    $17.80 Add to cart
  • Black Plague

    BLACK PLAGUE: GANG GREEN SMOOTH SERIES 9MM (10 pack)

    The Smooth Series Tabs just got even BETTER!! These Gang Green tabs are stronger in every way and have exceptional adhesion to give INCREDIBLE pulls in every circumstance. Our new high visibility green color will help you find your lost tabs when the go flying out of your Lifter or slide hammer too! Gang Green and tabweld glue were used to WIN the Intl Dent Olympics Glue Pulling competition for 2016 and they will help you up your game in less time and make more money too. This particular 9mm tab (GBP9mm) will make you a believer in small tabs! There are many hail techs who use this tab only 90% of the time due to its incredible strength and ability to pull that center pit like no other small tab.

    (0 reviews)
    $27.50 Add to cart
  • Black Plague

    BLACK PLAGUE: GANG GREEN SMOOTH SERIES 25MM (10 pack)

    The Smooth Series Tabs just got even BETTER!! These Gang Green tabs are stronger in every way and have exceptional adhesion to give INCREDIBLE pulls in every circumstance. Our new high visibility green color will help you find your lost tabs when the go flying out of your Lifter or slide hammer too! Gang Green and tabweld glue were used to WIN the Intl Dent Olympics Glue Pulling competition for 2016 and they will help you up your game in less time and make more money too. This particular 25mm tab (GBP25mm) will make you a believer in small tabs! There are many hail techs rely on this little monster to get that big tab pull without making a big mess of the panel.

    (0 reviews)
    $27.50 Add to cart
  • BLACK PLAGUE GANG GREEN SMOOTH SERIES 20MM White
    Black Plague

    BLACK PLAGUE: GANG GREEN SMOOTH SERIES 20MM (10 pack)

    The Smooth Series Tabs just got even BETTER!! These Gang Green tabs are stronger in every way and have exceptional adhesion to give INCREDIBLE pulls in every circumstance. Our new high visibility green color will help you find your lost tabs when the go flying out of your Lifter or slide hammer too! Gang Green and tabweld glue were used to WIN the Intl Dent Olympics Glue Pulling competition for 2016 and they will help you up your game in less time and make more money too. This particular 20mm tab (GBP20mm) will make you a believer in small tabs! There are many hail techs rely on this little monster to get that big tab pull without making a big mess of the panel.

    (0 reviews)
    $27.50 Add to cart
  • BLACK PLAGUE GANG GREEN SMOOTH SERIES 15MM White
    Black Plague

    BLACK PLAGUE: GANG GREEN SMOOTH SERIES 15MM (10 pack)

    The Smooth Series Tabs just got even BETTER!! These Gang Green tabs are stronger in every way and have exceptional adhesion to give INCREDIBLE pulls in every circumstance. Our new high visibility green color will help you find your lost tabs when the go flying out of your Lifter or slide hammer too! Gang Green and tabweld glue were used to WIN the Intl Dent Olympics Glue Pulling competition for 2016 and they will help you up your game in less time and make more money too. This particular 15mm tab (GBP15mm) will make you a believer in small tabs! There are many hail techs rely on this little monster to get that big tab pull without making a big mess of the panel.

    (0 reviews)
    $27.50 Add to cart
  • Black Plague

    BLACK PLAGUE: GANG GREEN SKINNY 38MM (10 pack)

    The Smooth Series Tabs just got even BETTER!! These Gang Green tabs are stronger in every way and have exceptional adhesion to give INCREDIBLE pulls in every circumstance. Our new high visibility green color will help you find your lost tabs when the go flying out of your Lifter or slide hammer too! Gang Green and tabweld glue were used to WIN the Intl Dent Olympics Glue Pulling competition for 2016 and they will help you up your game in less time and make more money too. This is the smallest reinforced style crease tab in the Gang Green series to utilize our new skinny width! These tabs will BLOW YOU AWAY with their ability to yank up a small defined area. Get them today if you’re serious about PDR.

    (0 reviews)
    $27.50 Add to cart
  • Black Plague

    BLACK PLAGUE: GANG GREEN SMOOTH 70MM (5 pack)

    The Smooth Series Tabs just got even BETTER!! These Gang Green tabs are stronger in every way and have exceptional adhesion to give INCREDIBLE pulls in every circumstance. Our new high visibility green color will help you find your lost tabs when the go flying out of your Lifter or slide hammer too! Gang Green and tabweld glue were used to WIN the Intl Dent Olympics Glue Pulling competition for 2016 and they will help you up your game in less time and make more money too. This is the smallest reinforced style crease tab in the Gang Green series. The GCT70MM is a BEAST! It benefits from the increased back bone and upgraded head of the large style crease tabs for maximum metal moving! Beast mode: ON

    (0 reviews)
    $13.75 Add to cart
  • Black Plague

    BLACK PLAGUE: GANG GREEN SMOOTH 51MM (5 pack)

    The Smooth Series Tabs just got even BETTER!! These Gang Green tabs are stronger in every way and have exceptional adhesion to give INCREDIBLE pulls in every circumstance. Our new high visibility green color will help you find your lost tabs when the go flying out of your Lifter or slide hammer too! Gang Green and tabweld glue were used to WIN the Intl Dent Olympics Glue Pulling competition for 2016 and they will help you up your game in less time and make more money too. This is the smallest reinforced style crease tab in the Gang Green series. The GCT51MM is a BEAST! It benefits from the increased back bone and upgraded head of the large style crease tabs but is shorter for average style crease or door ding repair Beast mode: ON

    (0 reviews)
    $13.75 Add to cart
  • Black Plague

    BLACK PLAGUE: Black Ice Glue Tabs, 25mm

    (0 reviews)
    $17.80 Add to cart
  • Black Plague

    BLACK PLAGUE: Black Ice Glue Tabs, 9mm

    (0 reviews)
    $17.80 Read more
  • Black Plague

    BLACK PLAGUE: ROUND TAB 10 PACK 25MM

    (0 reviews)
    $27.50 Add to cart
  • Carbon Tech

    Carbon Tech: Never Loose Adaptor

    Never Loose Adaptor mounts to either the DNE or Ultra light Collar and lets you mount the never loose magnetic light mount 90 degrees to the boom to allow the light to slide up and down the boom. This is great for side panel guys. I do not recommend these for hail tech because it takes the ease and articulation out of the Never Loose and slows you down!!

    (0 reviews)
    $25.00 Add to cart
    Best Sellers

    DNE: 38″x12″ 6-Strip LED Light- Stand Black-Never Loose Mounting

    New 38″x12″ 6-Strip LED Light with Stand Black with Never loose Mounting Plate

    (Never Loose Not Included)

     

    (0 reviews)
    $849.00 Add to cart
  • DNE

    DNE: 52″ 6-Strip LED Light (Head Only)

    52″ 6-Strip LED Light
    HEAD Only

    No stand included

    (0 reviews)
    $649.00 Read more
    DNE

    DNE: Carbon Rod (2500) 98″

    The carbon rod is made from a material which has high strength, rigidity and low weight. Rod is designed for the repair of hail damage on technology “repair dents without painting.” It consists of three parts, which are interconnected threaded connection that eliminates backlash and provides strength of the product as a whole. So is it allows you to change the length of the rod, increase or reduce the overall length. Tie rod has four holes for threaded nozzles c 5.16 inches (USA).
    Product specifications:
    Material – Carbon;
    The total length of the boom – 2500 mm .;
    – nozzle length – 1000 mm .;
    – handle length – 500 mm .;
    – center extender – 1000 mm.
    Rod diameter – 29 mm.
    Bar weight – 1.3 kg.
    Number of Holes for nozzles – 4.

    (0 reviews)
    $750.00 Add to cart
    DNE

    DNE: Carbon Rod (2000) 78″

    The carbon rod is made from  a material which has high strength, rigidity and low weight. Rod is designed for the repair of hail damage on technology “repair dents without painting.” It consists of three parts, which are interconnected threaded connection that eliminates backlash and provides strength of the product as a whole. So is it allows you to change the length of the rod, increase or reduce the overall length. Tie rod has four holes for threaded nozzles c 5.16 inches (USA).
    Product specifications:
    Material – Carbon;
    The total length of the boom – 2010 mm .;
    – nozzle length – 1000 mm .;
    – handle length – 500 mm .;
    – central extension – 510 mm.
    Rod diameter – 29 mm.
    Bar weight – 0.96 kg.
    Number of Holes for nozzles – 4.

    (0 reviews)
    $575.00 Add to cart
    DNE

    DNE: S4 Hood Stand

    Folding, multifunctional, aluminum table Dneprodenttools company for repair of removable parts of the car – the bonnet, doors, boot lid, etc .. The table consists of a base-side sliding drawers and four adjustable S-shaped supports.

    Main section bearing parts are made from a solid aluminum profile pipe 30×30 mm. Pull-regulated S-shaped supports are made of polished stainless steel d = 20 mm., Also of stainless steel profile pipes are made by sliding the guide section “X” axis. The table is supported by four roller hardware d = 75 mm. Latching. In the center of the table has a removable retainer to lock the boot lid. on S-shaped sliding bearings, are quick-action locks the settings pre-working height of the table without having to screw fixation. Also on sliding supports there is a semicircle for additional fixation component to be repaired and the support rubber tip. All moving parts of the table fixed with a screw ring, which ensures maximum comfort while fixing ties parts to the table.

    Dimensions of the table:

    By “X” axis

    – in assembled state – 850 mm .;

    – in the unfolded state – 1370 mm .;

    – in the unfolded state with the S-shaped supports – 1900 mm.

    By “axis Y »

    – when assembled – 1,020 mm .;

    – in the unfolded state – 1450 mm.

    Net weight – 12.8 kg.

    (0 reviews)
    $450.00 Add to cart
    Best Sellers

    DNE: New 52×11.5″ 6-Strip LED Light- Stand Black-Never Loose Mounting

    New 52×11.5″ 6-Strip LED Light with Stand Black with Never loose Mounting Plate

    (Never Loose Not Included)

     

    (0 reviews)
    $949.00 Read more
    DNE

    DNE: 22″ 6-Strip LED Light With Spider Stand

    22″ x 10″ 6-Strip LED Light

    Includes Spider Stand

    (0 reviews)
    $549.00 Add to cart
  • DNE

    DNE: 12″ Wide 38″ Long 6-Strip LED Light Lens Cover

    12″ 6-Strip LED Light
    Lens Only

    No light included
    No stand included

    (0 reviews)
    $75.00 Read more
  • DNE

    DNE: 52″ 6-Strip LED Light Lens Cover

    52″ 6-Strip LED Light
    Lens Only

    No light included
    No stand included

    (0 reviews)
    $100.00 Read more
  • Edgy Tools

    Edgy Tools: PIRATE LEG TIKI

    Features:

    • Made out of our Tiki Material!
    • Great for PDR work on high-end paint jobs

    Content:

    The Pirate Leg Tiki tip is one of those tools that you might not know you need until you get one, and after that, you won’t be able to live without it! Our Tiki Material makes this tip perfect for delicate jobs on high-end paint. Like one of our clients said, “THEY ARRRGH GREAT!”

    Make sure when you are working on more delicate jobs and paint to have your Tiki material tips to avoid any expensive errors. We created this material with the technicians in mind — the tool for a better job with amazing results!

    Includes:

    • (1) Pirate Leg Tiki Tip
    (0 reviews)
    $32.00 Add to cart
  • Edgy Tools

    Edgy Tools: D-CUP KNOCKER

    Features:

    • 31mm head width (Half Dollar)
    • Fit on most blending hammers
    • Super Steel
    • Mirror Finished
    • Solid Construction (Not threaded rod!)

    This D-Cup knocker™ blending tip is the ultimate game changer for your PDR bag of tricks. It has a 31mm head width. Many PDR technicians say that this and our other knocker tips are the best tips they’ve ever used.

    Includes:

    • (1) D-Cup Knocker Blending Hammer Tip
    (0 reviews)
    $50.00 Add to cart
  • Edgy Tools

    Edgy Tools: 1 INCH EXTENSION

    Sometimes you need a little extra length 😉 The only aluminum extensions available are perfect for use on blending hammers and string enough for pushing with rods.

    • Black Magic is a special material similar to peek but a little better for PDR
    • Super Steel is twice the Rockwell
    • hardness of Titanium!
    • Tiki is a custom material designed specifically for EdgyTools intended to be the perfect knockdown tip
    • Our Pushing tips are .49” so they fit very nicely in a half-inch hole (Not that anyone drills)
    (0 reviews)
    $10.00 Add to cart
  • Edgy Tools

    Edgy Tools: STAINLESS MIRROR POLISHED NARROW TIP

    Features:

    • Incredible Accuracy
    • Great for Precision Knocking Down
    • Ideal for knocking down the lines on the edge of a panel

    EdgyTools brings this bad boy to the PDR arena with the aim to provide you with the Ultimate Precision Knockdown Tip

    Includes:

    • (1) Mirror Polished Stainless Steel Flat Tip Knockdown Tip
    (0 reviews)
    $25.00 Add to cart
  • Edgy Tools

    Edgy Tools: THE POLISHED KNOB

    Possibly the most forgiving metal knockdown tip, The Polished Knob will amaze you with the completely unique way it moves metal. It delivers a true strike!

    Includes:

    • (1) The Mirror Polished Knob

    * Patent App. Pending O-Ring Groove & Integrated Threads

    *Although this product has a Lifetime Gator Guarantee, the mirror finish / polished finish needs to be maintained by the customer just like a sharp edge on a knife has to be manually maintained.

    (0 reviews)
    $35.00 Add to cart
  • Edgy Tools

    Edgy Tools: A-CUP KNOCKER

    Features:

    • 9mm head width
    • Awesome for hail damage
    • Mirror-finished
    • Solid construction (not threaded rod)
    • Patent app. pending; built-in O-Ring groove design
    (0 reviews)
    $50.00 Add to cart
  • Edgy Tools

    Edgy Tools: C-CUP KNOCKER DIPPED

    Features:

    • Coated tip (About the size of a Quarter)
    • Standard size screw for any PDR blending hammer
    • Mirror Polished under the PVC Coating

    This coated C-Cup Knocker™ is definitely a game changer when it comes to blending tips for PDR work. The coated end will provide you with a smoother and better surface to achieve the dent repair finish you are looking for and do it without damaging the paint.

    Includes:

    • (1) Coated C-Cup Knocker Tip

    Please Note: This tip is already highly mirror polished so after the Green PVC Coating wears out, just carefully remove it and you’ve got a fantastic tip ready to go!

    * Patent App. Pending O-Ring Groove & Integrated Threads 

    *Although this product has a Lifetime Gator Guarantee, the coating is not covered since coatings by their nature wear out.

    (0 reviews)
    $55.00 Add to cart
  • Edgy Tools

    Edgy Tools: Bullseye Tiny Weenie – Sharp Low Profile PDR Tip

    Super Sharp – Tiny Weenie Precision Pushing Tip

    The Super Sharp –  Tiny Weenie Precision Pushing Tip is what Flat Bars and the Dent Dial have been missing. Now you can shrink metal better and fine tune the last 10% of the dent, which is always the hardest. This little tip is made of Super Steel and will stay sharp an incredibly long time. This is a small version of the Super Sharp V-Tip which has become many technician’s favorite sharp tip.

    (0 reviews)
    $27.50 Add to cart
  • Edgy Tools

    Edgy Tools: Rocket Ship (Black Magic)

    High visibility for knocking down high spots.

    (0 reviews)
    $15.00 Add to cart
  • Edgy Tools

    Edgy Tools: The Finger™ – Ding Ring™

    Ergonomic Wearable Knockdown Includes: (1) Complete Finger Assembly with Mirror Polished Tip (4) Soft Caps (60, 70, 80 and 90 durometric hardnesses) (4) Hard Tips (Rocket Ship and Original Gator Tooth Tip Shapes miniaturized in Black Magic and White Lightning Materials (1) Extra long medical grade velcro strap

    (0 reviews)
    $55.00 Add to cart
  • Edgy Tools

    Edgy Tools: Flat Pushing Tip

    The flat tip provides nice clean pushes and then use the edge to finish the dent.

    (0 reviews)
    $25.00 Add to cart
  • Edgy Tools

    Edgy Tools: The Tank

    This tip is as strong as a tank and it is great for working on motorcycle tanks as well as the thick steel on classic cars.

    (0 reviews)
    $35.00 Read more
  • Knock Downs

    VIP Knockdown 3.0
    • Aluminum core, anodized color
    • Built in large magnet to prevent rolling on steel
    • Standard thread 5/16
    • Thick soft rubber cushion grip to reduce vibrations
    • 3 7/8″ long  (98mm)
    • 4 7/8″ long (124mm) with tip
    • Hex head (prevents rolling on aluminum panel)
    • Precise tapper for fine, detailed finish
    • Great for aluminum and steel panels
    • Comes without the tip
    (0 reviews)
    $55.00 Add to cart
  • VIP

    VIP HOLE STRAIGHTENER

    VIP Hole Straightener
    Repairs and compresses edge of holes after deformed with tool in the   dent repair process
    Great for straightening hood holes any size
    Tool will come with blue handle  grips
    Very handy  and quick , just turn the knob while  squeezing  the handle  few times

    (0 reviews)
    $95.00 Read more
  • VIP

    VIP PR PEEK REGULAR SCREW ON INTERCHANGEABLE TIP

    VIP PR  Peek Regular Screw On Interchangeable Tip:

    • Proudly Made in the USA
    • Smooth  regular tip
    • Made of high grade  Peek composite
    • 1″   (25.4 mm) long
    • 5/32 ( 4.0 mm) diameter tip
    • Precise taper for stiff places ( roof rails  )
    • Great for aluminum and steel panels
    • Fits most knockdowns
    (0 reviews)
    $25.00 Read more
  • VIP

    VIP Swivel Tip

    VIP Swivel tip :

    • Proudly Made in the USA
    • Smooth   large tip with some slightly radius
    • Made of high grade stainless steal
    • Hex head
    • 1 5/16″   (34 mm) long
    •  1 1/4″ ( 32 mm) diameter tip
    • Great for large dents ,large hail damage etc.
    (0 reviews)
    $80.00 Add to cart
  • VIP

    VIP S SNIPER Screw On Interchangeable Tip

    VIP S SNIPER Screw On Interchangeable Tip:

    • Proudly Made in the USA
    • Smooth tip that won’t scratch the paint (use common sense)
    • Made of high grade and heat treated stainless steal
    • Hex head
    • 1″   (25.4 mm) long
    • 1/8″  (3.0 mm) diameter tip
    • Precise taper for very fine detailing finish
    • Great for aluminum and steel panels
    • Fits most knockdowns
    (0 reviews)
    $25.00 Add to cart
  • VIP

    VIP Blending Tip

    VIP Blending   Tip:

    • Proudly Made in the USA
    •  Highly polish blending  tip that won’t scratch the paint
    • Made of high grade and heat treated stainless steal
    • Hex head and standard thread 5/16
    • 1″   (25.4 mm) long
    • 3/8″  (10.0 mm) diameter tip
    • Precise blending tip for fine detailing finish
    • Great for aluminum and steel panels
    • Fits most blending hammers
    (0 reviews)
    $39.00 Add to cart
  • VIP

    VIP F Fat Screw On Interchangeable Tip

    VIP F Fat Screw On Interchangeable Tip:

    • Proudly Made in the USA
    • Smooth   large tip with some radius , cut on the side for better visibility
    • Made of high grade and heat treated stainless steal
    • Hex head
    • 1″   (25.4 mm) long
    • 1/4″ x 1/2 ( 6.35 mm x 12.7 mm) diameter tip
    • Precise taper for crown work, or large high spots
    • Great for aluminum and steel panels
    • Fits most knockdowns
    (0 reviews)
    $25.00 Add to cart
  • VIP

    VIP Screw On Interchangeable Tip

    VIP Screw On Interchangeable Tip DESCRIPTION: Proudly Made in the USA Smooth tip that won’t scratch the paint Made of high grade and heat treated stainless steal Hex head 1″ (25.4 mm) long 5/32″ (4.0 mm) diameter tip Precise taper for fine detailing finish Great for aluminum and steel panels Fits most knockdowns and blending hammers

    (0 reviews)
    $25.00 Add to cart
  • Knock Downs

    VIP Knockdown 2.0

    (0 reviews)
    $45.00 Add to cart

INTERIOR & ACCESSORIES

Low Prices. Price matchguarantee

Shop Now

  • Dentcraft

    DENTCRAFT: Steel 2lb Slide Hammer

    2lb (.9 Kilo) steel slide hammer has a zinc coated steel shaft.

    4 inch weight is 2 lbs, The large comfort grip is five inches long.

    Weight has a travel of 7-1/2” inches.

    Weight is also zinc coated to protect against rust and contamination.

    Top Grip with a easy grip design fits nicely in the palm of your hand.

    Tab adapter is designed to fit almost every pdr glue tab available.

    (0 reviews)
    $149.95 Add to cart
  • Dentcraft

    DENTCRAFT: Aluminum Slide Hammer

    12 oz slide -Light weight all aluminum anodized finish -Fits most tabs -19″ overall length

    (0 reviews)
    $149.95 Add to cart
    PDR Accessories

    Flat Bar Attachment (Moose Knuckle)

    Flat bar attachment for the Moose Knuckle.

    Moose Knuckle is not included.

    (0 reviews)
    $60.00 Add to cart
  • Guns

    Trifecta Cordless Glue Gun Glue

    The Trifecta Trigger glue gun comes was designed with a dual temperature switch.

    The glue gun accepts a Ryobi 18 Volt ONE battery by default, you can purchase adapters for Dewalt, Makita, Milwaukee. or Bosch separately.

    The red light setting is a standard temperature of 383 F.

    This setting is very similar to traditional high temp glue guns and will give the glue you use a similar feel and function to standard electric powered glue guns.

    However, by moving the on/off switch the opposite direction to the blue light setting, the glue gun will run at a reduced temperature.  We call this “Eco Mode” and it is designed to be hot enough to allow the various adhesives to perform well, but greatly extend the battery run time of the tool.  For instance, in the Eco setting the run time of a fully charged lithium-ion battery can be up to three times the run time of the tool in the red or high temp setting.

    The feedback we have always received on battery power glue guns is how to increase battery life.  This new Eco Mode is designed to do just that.

    Other unique features include time tested durable feed design, extension nozzle for a clear view of glue placement, heat up time in either setting of 3 minutes.

    (0 reviews)
    $140.00 Add to cart
  • Keco

    KECO: Dead Center 55 x 7 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $18.00 Add to cart
  • Keco

    KECO: Dead Center 45 x 7 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $18.00 Add to cart
  • Dentcraft

    DENTCRAFT: Steel 2lb Slide Hammer

    2lb (.9 Kilo) steel slide hammer has a zinc coated steel shaft.

    4 inch weight is 2 lbs, The large comfort grip is five inches long.

    Weight has a travel of 7-1/2” inches.

    Weight is also zinc coated to protect against rust and contamination.

    Top Grip with a easy grip design fits nicely in the palm of your hand.

    Tab adapter is designed to fit almost every pdr glue tab available.

    (0 reviews)
    $149.95 Add to cart
  • Dentcraft

    DENTCRAFT: Aluminum Slide Hammer

    12 oz slide -Light weight all aluminum anodized finish -Fits most tabs -19″ overall length

    (0 reviews)
    $149.95 Add to cart
    PDR Accessories

    Flat Bar Attachment (Moose Knuckle)

    Flat bar attachment for the Moose Knuckle.

    Moose Knuckle is not included.

    (0 reviews)
    $60.00 Add to cart
  • Guns

    Trifecta Cordless Glue Gun Glue

    The Trifecta Trigger glue gun comes was designed with a dual temperature switch.

    The glue gun accepts a Ryobi 18 Volt ONE battery by default, you can purchase adapters for Dewalt, Makita, Milwaukee. or Bosch separately.

    The red light setting is a standard temperature of 383 F.

    This setting is very similar to traditional high temp glue guns and will give the glue you use a similar feel and function to standard electric powered glue guns.

    However, by moving the on/off switch the opposite direction to the blue light setting, the glue gun will run at a reduced temperature.  We call this “Eco Mode” and it is designed to be hot enough to allow the various adhesives to perform well, but greatly extend the battery run time of the tool.  For instance, in the Eco setting the run time of a fully charged lithium-ion battery can be up to three times the run time of the tool in the red or high temp setting.

    The feedback we have always received on battery power glue guns is how to increase battery life.  This new Eco Mode is designed to do just that.

    Other unique features include time tested durable feed design, extension nozzle for a clear view of glue placement, heat up time in either setting of 3 minutes.

    (0 reviews)
    $140.00 Add to cart
  • Keco

    KECO: Dead Center 55 x 7 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $18.00 Add to cart
  • Keco

    KECO: Dead Center 45 x 7 mm Blue Straight Crease Glue Tabs (5 Pack)

    Dead Center® Crease Tabs’ face thickness and neck diameters are engineered to transfer lifting power to the center of the tab. This design creates clean, fast and precise results while still allowing the tab to flex around the edges to avoid over-pulling. The PDR finishing tabs have a smooth face and are available in the rigid ice and flexible blue material.

    • Specialized Neck to Face Ratio – creates best possible rigid center pull with flex along the edges to avoid overpulling
    • Blue material – most flexible, long-lasting tab material
    • Blue Material – most flexible, long lasting tab material
    (0 reviews)
    $18.00 Add to cart

Follow Us On Instagram

Click here
Need Tools?
Call Our Mobile Van620-481-7198